WL4T - CNC turning machine

• connection of digital and analogue position sensors: up to 8 channels + extension capacity;
• analogue (16-bits DAC 10V) and digital control of the regulated supply drives: up to 6 control channels + extension capacity; update frequency of controlling impacts on the drive is parametrically set, up to 4.885kHz;
• linear, circular, spiral, spline interpolation; interpolation servo cycle frequency;
• thread making with regular or variable step; alternate/reciprocal treaded motion adjustment;
• correction on length and instrument radius; individual instruments anchor;
• dimensions measuring by means of contact probe; automatic instruments anchoring;
• possibility to extend the CNC for multisaddle machine (up to 4 saddles) control; independent program adjustment for every saddle; program adjustment synchronization on different saddles;
• protection against programming mistakes with correction of speeding-up/deceleration;
• independent zone correction of dimensions up to 2000 points for each type of correction; correction value is up to 255 increment;
• zone compensation of slackness up to 2000 zones; the compensation value is up to 255 increment;
• the mode of CNC autotuning, ability to take transitional characteristics of the drive and its displaying on a screen.
• compatibility of the CP with EIA RS-274-D (Interchangeable Block Data Format for NC Machines);
• long-term nonvolatile program memory from 64 Mb;
• input/output and operating programs performance on RS-232, protocols FTP, USB and from long-term memory;
• programs editing directly on the machine; program editing dialogue mode: bevel, fillet, rounding, coupling etc.;
• implementation of the powerful macrolanguage (variables, functions, branching, cycles, subprograms);
• the cycle of the part roughing according to the set contour;
• search of the frame with positioning to the point of the frame beginning; program start from the frame; rapid and frame-accurate mode of programs adjustment; frame execution in preset;
• program debugging in the graphic mode without its debugging on the machine;
• service capabilities and internal diagnosis; displaying of the state of digitization, DAC outputs, interim signals, displaying of the relay ladder logic system input and output signals state; means of manual activation/deactivation of signals of the relay ladder logic system directly on the CNC;
• intuitive graphic russified user interface; ability to adjust interface according to the user's needs and sense of taste (fonts type and size, color scheme); ability to change the interface language to another; built-in calculator;

You can download manual here

Back